Photo AI

4 (a) Radioactive tracers can be used when scanning a person’s kidneys - Edexcel - GCSE Physics - Question 4 - 2022 - Paper 1

Question icon

Question 4

4-(a)-Radioactive-tracers-can-be-used-when-scanning-a-person’s-kidneys-Edexcel-GCSE Physics-Question 4-2022-Paper 1.png

4 (a) Radioactive tracers can be used when scanning a person’s kidneys. A radioactive isotope is injected into a person’s blood stream. The isotope emits radia... show full transcript

Worked Solution & Example Answer:4 (a) Radioactive tracers can be used when scanning a person’s kidneys - Edexcel - GCSE Physics - Question 4 - 2022 - Paper 1

Step 1

What type of radiation travels from the kidney to the scanner?

96%

114 rated

Answer

The type of radiation that travels from the kidney to the scanner is D gamma. This is because gamma radiation can pass through and out of the body, allowing it to be detected externally.

Step 2

State why an isotope with a half-life of about 6 minutes is not suitable.

99%

104 rated

Answer

An isotope with a half-life of about 6 minutes is not suitable because it decays too quickly to give a reading. The technician would not be able to obtain sufficient data within such a short time frame.

Step 3

State why an isotope with a half-life of about 6 days is not suitable.

96%

101 rated

Answer

An isotope with a half-life of about 6 days is not suitable because it remains in the body for too long, increasing the radiation dose to the patient and potentially causing harm.

Step 4

State two ways of reducing the radiation risks to the technician.

98%

120 rated

Answer

  1. Time limiting exposure: Reducing the time spent near the radiation source minimizes exposure.
  2. Wearing Personal Protective Equipment (PPE): This includes lead aprons or goggles to shield against radiation.

Step 5

Explain how pushing the control rods further into the reactor slows down the nuclear reaction.

97%

117 rated

Answer

Pushing the control rods further into the reactor absorbs more neutrons, which are necessary for sustaining the nuclear fission chain reaction. By absorbing these neutrons, the reaction slows down due to a lower probability of further fission events occurring.

Step 6

Calculate the average speed of the slow neutrons as a percentage of the average speed of the fast neutrons.

97%

121 rated

Answer

To calculate the average speed of slow neutrons as a percentage of fast neutrons:

  1. Average speed of fast neutrons: 3.0×107 m/s3.0 \times 10^7 \text{ m/s}

  2. Average speed of slow neutrons: 4.0×106 m/s4.0 \times 10^6 \text{ m/s}

  3. Percentage calculation:

    (4.0×1063.0×107)×100=4.0×10030=4003013.33%\left( \frac{4.0 \times 10^6}{3.0 \times 10^7} \right) \times 100 = \frac{4.0 \times 100}{30} = \frac{400}{30} \approx 13.33\%

Thus, the average speed of the slow neutrons is approximately 13.33% of the average speed of the fast neutrons.

Step 7

Describe how energy is transferred from the nuclear reaction to the next stage in the process.

96%

114 rated

Answer

Energy from the nuclear reaction is transferred to the heat exchanger, where the heat produced from fission is used to produce steam. This steam then drives turbines connected to generators, thus converting nuclear energy into electrical energy.

Join the GCSE students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;