Photo AI

Strip foundations are widely used for modern dwelling houses - Leaving Cert Construction Studies - Question 2 - 2008

Question icon

Question 2

Strip-foundations-are-widely-used-for-modern-dwelling-houses-Leaving Cert Construction Studies-Question 2-2008.png

Strip foundations are widely used for modern dwelling houses. (a) Using notes and neat freehand sketches, show the construction of a strip foundation for the extern... show full transcript

Worked Solution & Example Answer:Strip foundations are widely used for modern dwelling houses - Leaving Cert Construction Studies - Question 2 - 2008

Step 1

depth of trench

96%

114 rated

Answer

The depth of the trench must be sufficient to accommodate the type of foundation being used. Generally, the minimum depth for strip foundations is 600 mm, particularly for a building in freezing climates. The trench should also be deeper if the soil type requires it, ensuring it is below the frost line to prevent heaving.

Step 2

width of foundation

99%

104 rated

Answer

The width of the foundation should be at least three times the wall thickness. For a 300 mm wall, this means the minimum width for the foundation should be at least 900 mm. Properly sizing the foundation is crucial to evenly distribute the weight of the structure.

Step 3

thickness of foundation

96%

101 rated

Answer

The thickness of the concrete foundation must be at least 300 mm, ensuring adequate support and durability. This also helps to prevent issues related to cracking under load.

Step 4

position of a 300 mm wall on the foundation

98%

120 rated

Answer

The 300 mm wall must be centered on the foundation to ensure even distribution of load. The projections on both sides of the wall must be equal, which helps maintain balance and structural integrity.

Step 5

design detail to ensure foundation strength

97%

117 rated

Answer

To reinforce the foundation, additional design elements should include:

  • The projection "P" should be less than the thickness "T" to prevent shear failure.
  • Using reinforcing steel mesh within the concrete enhances its tensile strength.
  • Typical dimensions, such as three steel rods with a diameter of 12 mm, should be embedded where tensile strength is critical.
  • It is crucial that the concrete is poured and compacted properly around the reinforcing steel to ensure effective load distribution.

Join the Leaving Cert students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;