The graphic below shows a litter bin and logo - Leaving Cert DCG - Question A-4 - 2012
Question A-4
The graphic below shows a litter bin and logo. The drawing on the right is a partially completed perspective view of the bin. Complete the perspective drawing of the... show full transcript
Worked Solution & Example Answer:The graphic below shows a litter bin and logo - Leaving Cert DCG - Question A-4 - 2012
Step 1
Locate required 5 points on outline of bin
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
To accurately complete the drawing, first locate five significant points along the outline of the bin. These points should include both the top corners and the base corners. Number the points for clarity, such as P1, P2, P3, P4, and P5.
Step 2
Determine edges in perspective (vertical, horizontal and sloping)
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Next, draw the vertical edges from points P1 and P2 downwards. For horizontal edges, connect points at the top with those at the base, ensuring they align properly in a perspective view. For sloping edges, identify and connect the corresponding points that align with the vanishing point established initially.
Step 3
Determine and use Auxiliary Vanishing Point
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Identify an auxiliary vanishing point (AVP) for the sloping surfaces. From the points selected on the sloping edges, draw lines towards this AVP to establish the correct perspective angle. Use these lines to guide the shape and proportions of the bin's sloping surfaces.
Step 4
Perspective of horizontal lines
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Ensure that all horizontal lines from the outline are drawn accurately. These lines should converge towards the primary vanishing point (VP), which will maintain the integrity of the perspective view.
Step 5
Perspective of converging lines
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Verify that all converging lines from the top and sloping surfaces lead toward the auxiliary vanishing point, ensuring that the perspective is coherent and realistic. Adjust as necessary to maintain alignment.
Step 6
Completion of logo
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Finalize the drawing by incorporating the logo. Ensure that it is positioned correctly in relation to the bin and follows the perspective established by the previous steps. This adds the necessary detail and completeness to the perspective view.
Join the Leaving Cert students using SimpleStudy...
