State Faraday's law of electromagnetic induction - Leaving Cert Physics - Question 12(c) - 2007
Question 12(c)
State Faraday's law of electromagnetic induction.
Describe an experiment to demonstrate Faraday's law.
A resistor is connected in series with an ammeter and an ac ... show full transcript
Worked Solution & Example Answer:State Faraday's law of electromagnetic induction - Leaving Cert Physics - Question 12(c) - 2007
Step 1
State Faraday's law of electromagnetic induction.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Faraday's law of electromagnetic induction states that the induced electromotive force (emf) in a circuit is proportional to the rate of change of magnetic flux through the circuit. In equation form, it can be stated as:
ext{emf} = -rac{d ext{Φ}}{dt}
where ( \text{emf} ) is the induced electromotive force, ( \text{Φ} ) is the magnetic flux, and ( t ) is time. The negative sign indicates the direction of the induced emf according to Lenz's law.
Step 2
Describe an experiment to demonstrate Faraday's law.
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Apparatus
Coil
Magnet
Galvanometer or equivalent
Arrangement
Connect the coil to a galvanometer.
Procedure
Move the magnet towards the coil.
Observation
The faster the movement of the magnet, the greater the deflection of the galvanometer, which indicates an induced voltage.
Step 3
What is the effect on the current flowing in the circuit? Justify your answer.
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
When the resistor is replaced with a coil, the current flowing in the circuit is reduced. This occurs because:
The coil has a self-inductance, which opposes the change in current flow through it due to Lenz's law. When the coil is introduced, it generates a back emf that counters the applied voltage from the power supply.
Since the resistance of the circuit does not change, the back emf effectively reduces the net voltage applied across the circuit, resulting in a decrease in the current according to Ohm's law, ( I = \frac{V}{R} ), where ( I ) is current, ( V ) is voltage, and ( R ) is resistance.
Join the Leaving Cert students using SimpleStudy...