Photo AI

During an experiment to measure the specific latent heat of vaporisation of water, cold water was placed in an insulated copper calorimeter - Leaving Cert Physics - Question 2 - 2011

Question icon

Question 2

During-an-experiment-to-measure-the-specific-latent-heat-of-vaporisation-of-water,-cold-water-was-placed-in-an-insulated-copper-calorimeter-Leaving Cert Physics-Question 2-2011.png

During an experiment to measure the specific latent heat of vaporisation of water, cold water was placed in an insulated copper calorimeter. Dry steam was passed int... show full transcript

Worked Solution & Example Answer:During an experiment to measure the specific latent heat of vaporisation of water, cold water was placed in an insulated copper calorimeter - Leaving Cert Physics - Question 2 - 2011

Step 1

Draw a labelled diagram of the apparatus used in the experiment.

96%

114 rated

Answer

To draw a labelled diagram of the apparatus used, include the following components:

  1. Calorimeter (containing water)
  2. Temperature sensor (indicating the temperature of water)
  3. Steam source (showing entry point for steam into the calorimeter)
  4. Insulation around the calorimeter
  5. Stirrer for mixing

Make sure to label each component clearly, and if any component has a specific function, indicate that as well.

Step 2

What was the rise in temperature of the water in the experiment?

99%

104 rated

Answer

To find the rise in temperature, subtract the initial temperature of the water + calorimeter from the final temperature:

Rise in Temperature = Final Temperature - Initial Temperature Rise in Temperature = 19 °C - 10 °C = 9 °C.

Step 3

Describe how the mass of the cold water was found.

96%

101 rated

Answer

The mass of the cold water was found by using the formula for the mass of calorimeter and water combined, where the total mass is the known mass of the calorimeter and the cold water. Specifically, the mass can be determined by weighing both the calorimeter and cold water together and then using the mass of the calorimeter separately to subtract and find the mass of the cold water.

Step 4

How was the steam dried?

98%

120 rated

Answer

The steam was dried by using a steam trap or delivery tube sloping upwards to allow any condensed steam or water to drain away, thus ensuring that only dry steam enters the calorimeter.

Step 5

Calculate: (a) the heat gained by the water and the calorimeter.

97%

117 rated

Answer

The heat gained by the water and the calorimeter can be calculated using the formula:

Q=mchetaQ = mc heta

Where:

  • mm is the mass of the water (67.50 g) plus the mass of the calorimeter (73.40 g), converted into kg.
  • cc is the specific heat capacity of water (4180 J/kg·K).
  • heta heta is the rise in temperature (9 °C).

Total mass = (67.50 g + 73.40 g) ÷ 1000 = 0.1409 kg.

Calculating the heat:

Q=0.1409imes4180imes9=5294.0JQ = 0.1409 imes 4180 imes 9 = 5294.0 J.

Step 6

Calculate: (b) the heat lost by the condensed steam.

97%

121 rated

Answer

To find the heat lost by the steam, the mass of steam (1.03 g) should be converted to kg and used in conjunction with the specific heat capacity:

Q=mchetaQ = mc heta

Where:

  • m=1.03g÷1000=0.00103kgm = 1.03 g ÷ 1000 = 0.00103 kg (mass of the steam)
  • c=4180J/kgKc = 4180 J/kg·K (specific heat capacity of water)
  • heta=100°C19°C=81°C heta = 100 °C - 19 °C = 81 °C (change in temperature)

Calculating the heat:

Q=0.00103imes4180imes81=348.7JQ = 0.00103 imes 4180 imes 81 = 348.7 J.

Step 7

Calculate: (c) the latent heat of vaporisation of water.

96%

114 rated

Answer

Using the heat values calculated earlier, we can express the latent heat of vaporization using:

L=QlostQgainedmsteamL = \frac{Q_{lost} - Q_{gained}}{m_{steam}}

Substituting the values:

  • Qgained=5294.0JQ_{gained} = 5294.0 J
  • Qlost=348.7JQ_{lost} = 348.7 J
  • msteam=1.03g=0.00103kgm_{steam} = 1.03 g = 0.00103 kg

Thus,

L=(5294.0)(348.7)0.00103=2448J/kgL = \frac{(5294.0) - (348.7)}{0.00103} = 2448 J/kg,

And in significant figures, this can be expressed as: L=2.37imes103J/kg.L = 2.37 imes 10^3 J/kg.

Join the Leaving Cert students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;