Read the following passage and answer the accompanying questions - Leaving Cert Physics - Question 11 - 2017
Question 11
Read the following passage and answer the accompanying questions.
Telecommunications have been among the most influential technologies in history. Communications ac... show full transcript
Worked Solution & Example Answer:Read the following passage and answer the accompanying questions - Leaving Cert Physics - Question 11 - 2017
Step 1
Draw a labelled diagram of an arrangement of apparatus that could be used to demonstrate the principle that a current-carrying conductor experiences a force in a magnetic field.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
A labelled diagram should include:
A current-carrying conductor (e.g., a straight wire)
A magnet (showing magnetic field lines)
A battery as the power supply
An ammeter or galvanometer to measure the current
The conductor should be placed between the poles of the magnet, with arrows to indicate the direction of current and magnetic field, showing the resultant force acting on the conductor.
Step 2
Explain how this principle is used in the definition of the ampere.
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The definition of the ampere is based on the electromagnetic force between two parallel conductors. When current flows through two wires placed 1 meter apart in a vacuum, they experience a force of 2 x 10^-7 N per meter of length. This force arises from the interaction of the magnetic fields generated by the currents in the wires, which shows the principle that a current-carrying conductor experiences a force in a magnetic field.
Step 3
Draw a circuit diagram of a Wheatstone bridge.
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The diagram should include four resistors arranged in a diamond shape, with two resistors on each side of the bridge. A galvanometer should be connected across the bridge to show the detection of current. An additional part should indicate the connection to a power source.
Step 4
Why did Telstar not allow transatlantic signals to be transmitted constantly?
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Telstar operated in a Medium Earth Orbit, which limits its coverage due to its orbiting path. Consequently, it could only facilitate communication during specific windows when it was above the horizon, leading to gaps in transmission where the satellite was not in geostationary orbit and thus not always above the same place on Earth.
Step 5
Calculate the radius of orbit of Telstar.
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Using the formula for orbital radius:
T2=GM4π2r3
Substituting known values:
T=2.6×60×60,M=6.0×1024kg
We find:
r=9.6×106m
Step 6
With the aid of a labelled diagram, explain how light is transmitted through optical fibres.
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Light is transmitted through optical fibres by the principle of total internal reflection. A diagram should illustrate:
The optical fibre structure showing the core and cladding.
An incident light ray approaching the core-cladding interface at an angle greater than the critical angle, resulting in total internal reflection.
The core must have a higher refractive index than the cladding to ensure that the light remains confined within the core.
Step 7
Light travels a distance of 5500 km along the Hibernia Express between London and New York. Calculate the refractive index of the glass used in the cable.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
To find the refractive index n, we can use the formula:
v=nc
where:
v: speed of light in glass
c: speed of light in a vacuum (3×108m/s)
Given the distance and time:
d=5500×103mt=29×10−3s
Calculate v=td. Hence,
n=vc=1.58
Step 8
What particles are used for transatlantic communication
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
(i) in telegraph cables: electrons,
(ii) in satellite signals: photons,
(iii) in optical fibres: photons.
Join the Leaving Cert students using SimpleStudy...