5.1 Describe FIVE safety measures applicable when using a push lawn mower - NSC Agricultural Technology - Question 5 - 2017 - Paper 1
Question 5
5.1 Describe FIVE safety measures applicable when using a push lawn mower.
5.2 A power take-off shaft is shown below. Answer the questions that follow.
5.2.1 Name ... show full transcript
Worked Solution & Example Answer:5.1 Describe FIVE safety measures applicable when using a push lawn mower - NSC Agricultural Technology - Question 5 - 2017 - Paper 1
Step 1
Describe FIVE safety measures applicable when using a push lawn mower.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Read the Operator's Manual: Familiarize yourself with the mower's operations and safety guidelines outlined in the manual.
Clear the Area: Before mowing, remove any debris, such as sticks or stones, from the lawn to prevent projectiles.
Wear Personal Protective Equipment (PPE): Always use appropriate PPE, such as sturdy shoes and eye protection, to ensure safety while operating.
Disengage the Blade Before Starting: Make sure the mower blade is disengaged before you start the engine to prevent accidental injuries.
Regular Maintenance: Follow the maintenance schedule provided by the manufacturer to keep the mower in safe operating condition.
Step 2
Name the device that allows the power take-off shaft to operate at an angle.
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The device that allows the power take-off shaft to operate at an angle is called a Universal Joint.
Step 3
State TWO requirements that these safety screens should comply with.
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Strong and Durable: The safety screens must be constructed from strong materials that can withstand impacts and prevent any accidental contact.
Proper Fit: The screens should not be loose or tight, ensuring that they remain securely in place during operation to provide effective protection.