Photo AI

3.1 Choose a description from COLUMN B that matches an item in COLUMN A - NSC Civil Technology Civil Services - Question 3 - 2016 - Paper 1

Question icon

Question 3

3.1-Choose-a-description-from-COLUMN-B-that-matches-an-item-in-COLUMN-A-NSC Civil Technology Civil Services-Question 3-2016-Paper 1.png

3.1 Choose a description from COLUMN B that matches an item in COLUMN A. Write only the letter (A–G) next to the question number (3.1.1–3.1.5) in the ANSWER BOOK, fo... show full transcript

Worked Solution & Example Answer:3.1 Choose a description from COLUMN B that matches an item in COLUMN A - NSC Civil Technology Civil Services - Question 3 - 2016 - Paper 1

Step 1

3.1 Choose a description from COLUMN B that matches an item in COLUMN A.

96%

114 rated

Answer

3.1.1 B 3.1.2 E 3.1.3 D 3.1.4 C 3.1.5 A

Step 2

3.2 Name any THREE materials that are used for the manufacture of pipes for a cold-water installation.

99%

104 rated

Answer

PVC pipe, copper pipe, galvanized pipe.

Step 3

3.3.1 Explain the purpose of A.

96%

101 rated

Answer

The purpose of A is to provide water to the tap.

Step 4

3.3.2 Explain the function of cap B on the pipe bend.

98%

120 rated

Answer

Cap B is removable to allow access to the inside of the pipe.

Step 5

3.3.3 Identify pipe C.

97%

117 rated

Answer

Pipe C is a waste water pipe.

Step 6

3.3.4 State the diameter of pipe C.

97%

121 rated

Answer

The diameter of pipe C is 40 mm / 50 mm.

Step 7

3.3.5 Explain the purpose of D.

96%

114 rated

Answer

D is used to anchor the pipe to the wall.

Step 8

3.3.6 Explain why you would fix a 45° PVC bend (E) at the end of pipe C.

99%

104 rated

Answer

E is used to guide the wastewater directly into the gully.

Step 9

3.3.7 State the diameter of pipe F.

96%

101 rated

Answer

The diameter of pipe F is 100 mm interior / 110 mm exterior.

Step 10

3.3.8 Describe the purpose of the water at G.

98%

120 rated

Answer

The water at G forms a water seal, preventing bad odours and gasses from entering back into the building.

Step 11

3.3.9 Identify part H.

97%

117 rated

Answer

Part H is a P-trap.

Step 12

3.4 Identify the following symbols as used in civil services.

97%

121 rated

Answer

3.4.1 Wash tub 3.4.2 Sewer line/drain pipes 3.4.3 Safety valve 3.4.4 Storm water drain pipes.

Step 13

3.5 Give TWO reasons why wastewater may not be channelled into a septic tank.

96%

114 rated

Answer

It contains chemicals that are poisonous to the bacteria in the tank. The tank will fill up quickly and block the system.

Step 14

3.6 Write the correct name of the part next to the letter (A–G) in the ANSWER BOOK.

99%

104 rated

Answer

A - Stopcock B - Pressure control valve C - Vacuum breaker D - Drain cock / Cold water inlet E - Drip tray F - Safety valve / Hot water outlet G - Hot water cylinder / Geyser.

Join the NSC students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;