5.1 Give ONE word(s)/term for EACH of the following descriptions by choosing a word(s)/term from the list below - NSC Civil Technology Civil Services - Question 5 - 2018 - Paper 1
Question 5
5.1 Give ONE word(s)/term for EACH of the following descriptions by choosing a word(s)/term from the list below. Write only the word(s)/term next to the question num... show full transcript
Worked Solution & Example Answer:5.1 Give ONE word(s)/term for EACH of the following descriptions by choosing a word(s)/term from the list below - NSC Civil Technology Civil Services - Question 5 - 2018 - Paper 1
Step 1
5.1.1 This fitting can be used to seal off the gutter at the ends
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The appropriate term for this description is Stop end.
Step 2
5.1.2 One factor to consider before installing a flashing
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
A key factor to consider is the Pitch of the roof.
Step 3
5.1.3 A material that can be used for flashings
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The material suitable for flashings is Galvanised sheet metal.
Step 4
5.1.4 This part collects rainwater flowing from the roof
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The term that describes this part is Gutter.
Step 5
5.1.5 A raised edge on the road that guides water to storm-water drains
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
This raised edge is known as a Kerb.
Step 6
5.2.1 Square gutter
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Draw a Square gutter, ensuring it connects properly to the drainage system.
Step 7
5.2.2 Down-pipe with offset
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Illustrate the Down-pipe with offset to show the accurate angle and connection.
Step 8
5.2.3 Holderbat
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Include the Holderbat in the drawing to secure the gutter system in place.
Step 9
5.3 Draw the development of the cone
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Using the provided dimensions and shape, draw the development of the cone with a focus on:
Constructing lines to top of cone
Outer circle divisions in 12 parts
Marking measuring points accurately to ensure a seamless development.
Remember to include the 3 mm seam on both sides.
