6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure. 6.2 Make neat sketches to illustrate the following symbols: 6.2.1 Water closet 6.2.2 Sink 6.2.3 Water meter 6.3 In which working drawing is the entrance to a site indicated? 6.4 FIGURE 6.4 on ANSWER SHEET D shows the floor plan of a store room on scale 1 : 50. Draw, on SHEET D, the south elevation on scale 1 : 50 from ANSWER SHEET D from the given ground level line by using the following information: - The floor level above the ground level: 200 mm - Wall height from the floor level to the ceiling: 2 600 mm - Window 1: 600 x 2 100 mm - Door 1: 1 400 x 2 100 mm - Door knob - Roof construction pitch: 30° - Indicate construction line to determine the roof height - Gabel end at west elevation - Hipped roof at east elevation Use the marks table on ANSWER SHEET D as reference.

NSC Civil Technology Woodworking Basic and advanced technical drawings: 6.1 Name FOUR responsibilities o

6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure - NSC Civil Technology Woodworking - Question 6 - 2017 - Paper 1

Question 6

6.1-Name-FOUR-responsibilities-of-the-architect-which-must-be-reflected-in-the-sketch-drawings-of-the-design-of-a-structure-NSC Civil Technology Woodworking-Question 6-2017-Paper 1.png

6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure. 6.2 Make neat sketches to illustrate th... show full transcript

Worked Solution & Example Answer:6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure - NSC Civil Technology Woodworking - Question 6 - 2017 - Paper 1

Step 1

6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure.

96%

114 rated

Answer

Determine the needs of the owners: Architects must understand and incorporate the specific requirements and preferences of the clients they are designing for.
Determine the arrangement of rooms: This involves planning the layout of the building's interior spaces to create a functional and efficient flow.
Determine the arrangement of windows and doors: Proper placement of windows and doors is essential for natural light, ventilation, and accessibility.
Show dimensions: Accurate measurements must be included in the drawings to ensure the structure is built to specifications.

Step 2

6.2.1 Water closet

99%

104 rated

Answer

To illustrate the water closet:

Sketch a simple rounded bowl shape for the toilet bowl.
Above it, depict a cistern or tank, often shown as a rectangle, connected with curved lines to represent plumbing.

Step 3

6.2.2 Sink

96%

101 rated

Answer

For the sink:

Draw a rectangular basin with a curved bottom to indicate the sink.
Include a faucet above the basin and a drain at the bottom; use curved lines for the plumbing connections.

Step 4

6.2.3 Water meter

98%

120 rated

Answer

For the water meter:

Sketch a circular shape to represent the meter.
Indicate inlet and outlet pipes on either side, often depicted as straight lines extending from the meter.

Step 5

6.3 In which working drawing is the entrance to a site indicated?

97%

117 rated

Answer

The entrance to a site is indicated in the site plan. This drawing shows the layout of the property and its access points.

Step 6

6.4 Draw, on SHEET D, the south elevation on scale 1 : 50.

97%

121 rated

Answer

To draw the south elevation based on the provided information:

Start by determining the overall height of the floor level plus wall height: 200 mm + 2600 mm = 2800 mm.
Mark the base of the wall at 2800 mm from the ground level line.
Draw the window, using the dimensions provided: a rectangle 600 mm wide and 2100 mm high, located at the appropriate height on the wall.
For Door 1, sketch a rectangle measuring 1400 mm wide by 2100 mm high, placed on the elevation where indicated.
Include the roof structure at a 30° pitch, ensuring the gable end and hipped roof are annotated at the correct elevations.

6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure - NSC Civil Technology Woodworking - Question 6 - 2017 - Paper 1

Worked Solution & Example Answer:6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure - NSC Civil Technology Woodworking - Question 6 - 2017 - Paper 1

6.1 Name FOUR responsibilities of the architect which must be reflected in the sketch drawings of the design of a structure.

6.2.1 Water closet

6.2.2 Sink

6.2.3 Water meter

6.3 In which working drawing is the entrance to a site indicated?

6.4 Draw, on SHEET D, the south elevation on scale 1 : 50.

Join the NSC students using SimpleStudy...