3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below - NSC Civil Technology Woodworking - Question 3 - 2022 - Paper 1
Question 3
3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below. Write only the word/term next to the question numbers (3.1... show full transcript
Worked Solution & Example Answer:3.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below - NSC Civil Technology Woodworking - Question 3 - 2022 - Paper 1
Step 1
3.1.1 The front horizontal member of the casement frame, fixed to the wall by means of horns on both ends
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The correct term for this part is Top Rail.
Step 2
3.1.2 The middle vertical member between the casement stiles
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
This part is known as the Mullion.
Step 3
3.1.3 The outer vertical member of the frame
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
This member is referred to as the Frame Stile.
Step 4
3.1.4 The horizontal member that separates the casement and the fanlight
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
This is known as the Transom.
Step 5
3.1.5 The horizontal members between the rails of a casement.
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
These are called Glazing Bars.
Step 6
3.3.1 Identify parts A to C.
97%
121 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
A: Front rail/Top rail
B: Intermediate side
C: Kick plate/Base plate/Base/Plinth
Step 7
3.3.2 Describe the purpose of a hanging rail in a cupboard.
96%
114 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
The hanging rail is used to hang clothes on, providing storage and organization.
Step 8
3.3.3 Draw, in your ANSWER BOOK, a neat freehand sketch of section D–D.
99%
104 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
A neat freehand sketch would include a detailed view of the cupboard structure, ensuring to label important parts.
Step 9
3.5.1 The total length of the rafters needed if the length of the rafter is 5 600 mm.
96%
101 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Total length = Number of rafters × Length of each rafter = 8 × 5.6 m = 44.8 m.
Step 10
3.5.2 The total length of the purlins needed if the length of the purlin is 9 600 mm.
98%
120 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Total length = Number of purlins × Length of each purlin = 4 × 9.6 m = 38.4 m.
Step 11
3.5.3 The total area of underlay needed if the underlay ends on the outside walls.
97%
117 rated
Only available for registered users.
Sign up now to view full answer, or log in if you already have an account!
Answer
Total area = Length × Width. Given the dimensions: 9.0 m × 5.0 m equals 45.0 m².
