Identify FIGURE A. Identify FIGURE B. Identify number 4. Identify number 5. Identify number 9. Identify number 6. Identify number 7. On what date was the plan printed? Who drew the building plan? Name the feature in the column for the notes in FIGURE 2 that must be installed to give access to the floor. Name the feature in the column for the notes in FIGURE 2 that must be installed in the bathroom. Identify the type of roof that is used for the building in FIGURE A. Explain the purpose of number 1. Explain the purpose of number 2. Explain the abbreviation FFL at number 6. Explain the purpose of number 7. Explain the meaning of the arrow on the feature that must be installed in front of the sliding door. Explain what is meant by 1:10 indicated on the symbol in the notes. Which room will feature 15 serve? Explain the short dash lines on the windows. Deduce the height of window 2 from the window schedule. Deduce the width of window 3 from the window schedule. On what elevation of the building is the bathroom window situated? Differentiate between component number 3 and component number 8. Differentiate between the light in the lounge and the light in the bathroom. Recommend a suitable floor covering for the bathroom. Recommend an appropriate scale to which FIGURE A should be drawn, according to SANS. Recommend an alternative sanitary fitment to replace number 11 that will serve a similar purpose. Calculate the internal area of the office in m² Show ALL calculations. Calculate the perimeter of the building. Show ALL calculations.

Photo AI

Identify FIGURE A - NSC Civil Technology Woodworking - Question 2 - 2018 - Paper 1

Question 2

Identify FIGURE A. Identify FIGURE B. Identify number 4. Identify number 5. Identify number 9. Identify number 6. Identify number 7. On what date was the plan printe... show full transcript

Worked Solution & Example Answer:Identify FIGURE A - NSC Civil Technology Woodworking - Question 2 - 2018 - Paper 1

Step 1

Identify FIGURE A.

96%

114 rated

Answer

FIGURE A is the South Elevation.

Step 2

Identify FIGURE B.

99%

104 rated

Answer

FIGURE B is the Ground floor plan/ Floorplan.

Step 3

Identify number 4.

96%

101 rated

Answer

The number 4 refers to the First floor level.

Step 4

Identify number 5.

98%

120 rated

Answer

Number 5 corresponds to the Window Sill.

Step 5

Identify number 9.

97%

117 rated

Answer

Number 9 indicates the Hand wash basin.

Step 6

Identify number 6.

97%

121 rated

Answer

Number 6 indicates the Water closet/WC.

Step 7

Identify number 7.

96%

114 rated

Answer

Number 7 corresponds to the Bath.

Step 8

On what date was the plan printed?

99%

104 rated

Answer

The plan was printed on 2018/10/02.

Step 9

Who drew the building plan?

96%

101 rated

Answer

The building plan was drawn by JP Maloi.

Step 10

Name the feature in the column for the notes in FIGURE 2 that must be installed to give access to the floor.

98%

120 rated

Answer

The feature is the Ramp.

Step 11

Name the feature in the column for the notes in FIGURE 2 that must be installed in the bathroom.

97%

117 rated

Answer

The feature is the Staircase/ Stairway.

Step 12

Identify the type of roof that is used for the building in FIGURE A.

97%

121 rated

Answer

The type of roof is a Gable roof.

Step 13

Explain the purpose of number 1.

96%

114 rated

Answer

The purpose is to cover the opening and close the gap between the two slopes of the roof, preventing water and elements from entering.

Step 14

Explain the purpose of number 2.

99%

104 rated

Answer

The purpose is to collect rainwater and channel it into the downpipe.

Step 15

Explain the abbreviation FFL at number 6.

96%

101 rated

Answer

FFL stands for Finished Floor Level.

Step 16

Explain the purpose of number 7.

98%

120 rated

Answer

The purpose is to channel the water from the gutter to the ground.

Step 17

Explain the meaning of the arrow on the feature that must be installed in front of the sliding door.

97%

117 rated

Answer

It indicates the direction of the slope of the ramp.

Step 18

Explain what is meant by 1:10 indicated on the symbol in the notes.

97%

121 rated

Answer

It indicates the slope or gradient of the ramp, where for every 10 metres horizontally, the ramp rises 1 metre vertically.

Step 19

Which room will feature 15 serve?

96%

114 rated

Answer

Feature 15 will serve the bathroom.

Step 20

Explain the short dash lines on the windows.

99%

104 rated

Answer

The short dash lines indicate the window opening and the location of the hinges.

Step 21

Deduce the height of window 2 from the window schedule.

96%

101 rated

Answer

The height of window 2 is 1,200 mm, ignoring units.

Step 22

Deduce the width of window 3 from the window schedule.

98%

120 rated

Answer

The width of window 3 is 2,000 mm, ignoring units.

Step 23

On what elevation of the building is the bathroom window situated?

97%

117 rated

Answer

The bathroom window is situated on the Western elevation.

Step 24

Differentiate between component number 3 and component number 8.

97%

121 rated

Answer

Component number 3 is a window while component number 8 is a sliding door.

Step 25

Differentiate between the light in the lounge and the light in the bathroom.

96%

114 rated

Answer

The lounge light is a fluorescent light rated at 40W, while the bathroom light is a standard ceiling light.

Step 26

Recommend a suitable floor covering for the bathroom.

99%

104 rated

Answer

A suitable floor covering could be Polished or stained concrete flooring.

Step 27

Recommend an appropriate scale to which FIGURE A should be drawn, according to SANS.

96%

101 rated

Answer

An appropriate scale is 1:50/100/200.

Step 28

Recommend an alternative sanitary fitment to replace number 11 that will serve a similar purpose.

98%

120 rated

Answer

A suitable replacement for number 11 could be a Shower.

Step 29

Calculate the internal area of the office in m² Show ALL calculations.

97%

117 rated

Answer

The internal area is calculated as: $(220 + 30 + 110 + 20 + 80 + 220) \, \text{m}^2 = 350 \, \text{m}^2$ .

Step 30

Calculate the perimeter of the building. Show ALL calculations.

97%

121 rated

Answer

The perimeter is calculated as: $(220 + 100 + 110 + 20 + 80 + 220) \times 2 = \text{550 m}$ .

Join the NSC students using SimpleStudy...

97% of Students

Report Improved Results

98% of Students

Recommend to friends

100,000+

Students Supported

1 Million+

Questions answered

;