Photo AI
2.1 Name any TWO pieces of personal safety equipment that you need to wear when working with an angle grinder - NSC Mechanical Technology Fitting and Machining - Question 2 - 2018 - Paper 1
Question 2
2.1 Name any TWO pieces of personal safety equipment that you need to wear when working with an angle grinder. 2.2 State THREE safety precautions you should observe... show full transcript
Worked Solution & Example Answer:2.1 Name any TWO pieces of personal safety equipment that you need to wear when working with an angle grinder - NSC Mechanical Technology Fitting and Machining - Question 2 - 2018 - Paper 1
Step 1
Name any TWO pieces of personal safety equipment that you need to wear when working with an angle grinder.
Answer
When working with an angle grinder, it is essential to wear the following personal safety equipment:
- Eye protection: Protects against flying debris and sparks.
- Safety gloves: Shields hands from potential cuts or abrasions.
Step 2
State THREE safety precautions you should observe before pressing a bearing from a shaft on a hydraulic press.
Answer
Before pressing a bearing from a shaft on a hydraulic press, ensure to take the following precautions:
- Check the hydraulic pressure: Ensure the prescribed pressure does not exceed safe limits.
- Inspect the work platform: Verify that the platform is stable and securely positioned.
- Use only the prescribed equipment: Ensure that only authorized tools are used to prevent accidents.
Step 3
Why is it important to wear an arc-welding helmet/shield during arc welding?
Answer
Wearing an arc-welding helmet/shield is crucial because it protects the skin and eyes from the dangerous ultraviolet rays and sparks produced during welding. Additionally, it protects the face from molten slag that can cause serious injuries.
Step 4
State TWO safety precautions that should be adhered to before you start working on a milling machine.
Answer
Before beginning work on a milling machine, adhere to the following safety precautions:
- Clamp workpieces securely: Always ensure that the workpieces are clamped properly to prevent movement.
- Check guards: Confirm that all safety guards are in place and functioning correctly.
Step 5
Step 6
State ONE safety precaution you should observe when using a spring compressor to remove a coil spring from a motor vehicle's suspension.
Answer
When using a spring compressor, ensure to make sure that the jaws/clamp of the spring compressor will not slip to avoid injury from the sudden release of tension.